Welcome to the ScooterHacking M365 Pro Open Beta! Please don't install any firmware if you're not comfortable with modding.
Download plain vanilla firmware by clicking here
This tool is based on the work of many community members.
If you feel like it, pay them a coffee.
Remove Charging Mode
ESC will ignore input from the charging line, scooter will be rideable during charge. Useful for non-official external batteries.
Makes the version number higher to prevent DRV updates from the Ninebot app.
Higher = More power. Too much power is not recommended for battery and motor life.
This value does not affect top speed.
All selectable values were tested at stock battery voltage and caused no damage to the tested scooters. However, you should select a value considering other factors such as elevated ambient temperatures (e.g. in summer), differences in component quality or battery mods.
System Voltage (for estimated draw display ONLY)
Estimated draw - Nominal 350W | Peak 700W
20 km/h45 km/h
Always off, speed-based
Direct power control
Curve type (DPC only)
Throttle virtual limit
Affecting current ramp-up for quadratic curve. Warning: This option also affects speed-throttle. Experimental!
Instead of speed-based, the throttle will work on a power-based algorithm (like in a thermal engine vehicle).
WARNING: Speed limit is ignored while using DPC.
Minimum speed in km/h before the motor will start.
0 km/h10 km/h
Lever virtual limit 115
Minimum phase current 8A
Maximum phase current 30A
The scooter won't start braking on it's own when the motor is not active.
You will still have recuperative braking when using the brake lever. Clonk-free.
No brake light flash on throttle release
The brake light won't start blinking when the motor is not active.
How many seconds it takes for cruise control to kick in.
1 second10 seconds
Stay on when scooter is locked
Disables auto shutdown when the scooter is locked so it stays on forever.
Change ESC<->BMS baud rate to 76800
Only if you use the compatible open source BMS!
Current raising coefficient, mA/step
How fast current will be applied. Affecting speed up rate.
Wheel speed constant
For 10" wheels use 315, don't change otherwise.
Battery voltage limit
If you want to connect a custom battery with a higher voltage.
-- select an app --
Select your flashing app..